Skip to main content

Call us now 021-4642643 / 086-1727569

 x 
Cart

Cart

Cart empty

ER65 Wheel Balancer

Product SKU: ER65
ER65 Automatic balancing machine with monitor
A balancing machine with ample monitor and intuitive graphical display which, combined to its large ergonomic weight tray, conveys prestige to the tire shop and transmits a sense of efficiency and professionalism to end users.

The ErgoFast range of balancing machines has been developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.

The automatic gauge enables detection of distance and diameter (up to 28″ rims) with relative activation of desired balancing program (clip-on or stick-on weights). No error due to manual inputs possible. The machine enables the operator to work according to his preferences. The correct application of counterweights can be selected in different modes: with the accuracy of position repeater, with the speed of laser beam or the conventional 12 o’clock position.

Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement.

Adhesive counter-weights positioning with laser beam
Pneumatic locking of wheel (ER65SE)
The LA sonar for width measurement enables an immediate entry of all necessary wheel data.


  • VDD Virtual Direct Drive - very quick and maintenance free measurement system
  • Sonar for automatic wheel width measurements
  • Automatic gauge for wheel diameter and offset
  • 17" TFT flat screen monitor
  • New mechanical pedal brake
  • Lock of wheel in the correction position by means of an electromagnetic brake (ER65SE)
  • Ergonomic tool positioning CLOSE AT HAND!
  • Software programs for the professionals: SPLIT, OPT, ALU
  • Extended gauge for diameter and distance measurement of rims up to 28" with new pincer to hold the adhesive weight
  • ALU-S balancing mode (adhesive weights on the internal rim planes) with specific counterweight position indicator (position repeater)
  • LASER for weight positioning inside the rim
  • ER65SE - Optional pneumatic wheel locking Floor to floor time reduction / Extremely easy and quick to use / Very accurate wheel centering

automatic gauge  splash guard  electric brake  icon laser  icon manual pneumatic


  • Single phase power supply 230 V 50 Hz
  • Max. absorbed power 0,15 kW
  • Balancing speed 100 rpm
  • Measuring cycle for 15 kg (33 lb) wheel 4.7 s
  • Measurement accuracy 0.5 g
  • Average noise < 70 dB
  • Rim width setting range 1.5" - 20" or 40 - 510 mm
  • Rim diameter setting range 10" - 30" or 265 - 765 mm
  • Max. wheel weight < 75 kg
  • Machine weight 120 kg

 


Cemb ER65 Wheel Balancer Brochure