ER85 EVO
Touchscreen wheel balancer with run-out measurement
Vibrations caused by run-out do not depend on the unbalance of wheel. The ER85 EVO, with one single quick spin, detects all causes of vibration. The EMS Sonar, supplied as standard on machine, detects wheel eccentricity with a 0,1 mm accuracy and enables a precise diagnosis within seconds. The new model ER85 EVO is now even more efficient thanks to the automatic positioning system.
Ergonomic design
The ErgoFast range of wheel balancers has been developed to offer the operator the best posssible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
Detection of wheel data
The automatic gauge for distance and diameter input (up to 28″ rims) and the LA Sonar device for wheel width measurement allow an immediate detection of all necessary wheel parameters.
Adhesive counter-weights positioning by means of SPOTTER Laser
Wheel locked in position for weight applications, LED light to illuminate working area in the internal part of rim and SPOTTER Laser for accurate positioning of the counter-weights guarantee a perfect balancing operation in one single spin.
Pneumatic locking of wheel
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions (SE Version).
OPB: One plane balancing
AutoAdaptive Mode
New automatic positioning system
HubMatch
- VDD Virtual Direct Drive - very quick and maintenance free measurement system
- Lock of wheel in the correction position by means of an electromagnetic brake
- LA SONAR for automatic measurement of the wheel width
-
Enables to eliminate the static and dynamic unbalance by means of a single counterweight, indicating its exact application point on the inner side of the rim.
- Software programs for the professionals: SPLIT, OPT, ALU
- Extended gauge for diameter and distance measurement of rims up to 28”
- Led light to illuminate the working space inside the rim
- ALU-S balancing mode (adhesive weights on the internal rim planes) with specific counterweight position indicator (position repeater)
- ER80SE - Pneumatic wheel locking : Floor to floor time reduction / Extremely easy and quick to use / Very accurate wheel centering
- Single phase power supply 230 V 50 Hz
- Max. absorbed power 0,15 kW
- Balancing speed 100 rpm
- Measuring cycle for 15 kg (33 lb) wheel 4.7 s
- Measurement accuracy 0.5 g
- Average noise < 70 dB
- Rim width setting range 1.5" - 20" or 40 - 510 mm
- Rim diameter setting range 10" - 30" or 265 - 765 mm
- Max. wheel weight < 75 kg
- Machine weight 120 kg
 |
Cemb ER85 Wheel Balancer Brochure |
